Advertisement
STEPS
(K)
DETAIL 'A'
DETAIL 'B'
The Placement of Balance Beam:
Fits into the second and second to last holes in line "B" (see detail B above).
NOTE: It is not necessary to remove the ladder steps prior to installing the
balance beam. Balance beam is designed to fi t over previously installed steps.
rev. 11.27.07 cjr
# 1393 Step Ladder
A
# 1393 Balance Beam
BALANCE BEAM
(L)
C
B
The Placement of Ladder Steps:
Alternate the steps by inserting one holes "B" and "C",
then the second in "A" and "B". Continuing as required
(see detail A above).
B
3
PLAN WITH
LADDER STEPS
INSTALLED
PLAN WITH
BALANCE BEAM
INSTALLED
©2007 HAUSMANN INDUSTRIES, INC.
Advertisement
