Advertisement
Installation Instructions for 1300 & 1302
1. Place Uprights on Platform Base as shown in
Illustrations.
2. Secure Uprights to Platform Base with 5/16 x
1 1/2" Bolts and Lock Washers supplied by
Hausmann.
3. Attach the Parallel Bars to the Uprights. To
attach the Parallel Bars to the Uprights, just
simply place the "T" fi ttings (attached to Parallel
Bars) onto the Adjustable Height Posts in the
Uprights.
4. Repeat steps 3 for other bar.
5. Once everything is in place, tighten all the Allen
Screws on the "T" fi ttings with Allen Wrench
provided.
Installation Instructions for 1390, 1392 & 1393
1. Place Uprights on Platform Base as shown in
Illustrations.
2. Secure Uprights to Platform Base with 5/16 x
1 1/2" Bolts and Lock Washers supplied by
Hausmann.
3. Attach the Parallel Bars to the Uprights. To
attach the Parallel Bars to the Uprights, just
simply place the "T" fi ttings (attached to
Adjustable Width fi tting which are attached to
the Parallel Bars.) onto the Adjustable Height
Posts in the Uprights.
4. Repeat steps 3 for other bar.
5. Once everything is in place, tighten all the Allen
Screws on the "T" fi ttings with Allen Wrench
provided.
Parallel Bar Height Adjustment
1. Remove Locking Pin from the Upright.
2. Raise or lower the Adjustable Height Post to
desired height.
3. Insert the Locking Pin into the Upright, through
the Adjustable Height Posts and all the way
through the other side of the Upright.
Parallel Bar Width Adjustment -
1390 & 1392 Only
1. To loosen the Width Adjustable fi tting, turn the
Control Knob clockwise.
2. Move the Width Adjustable fi tting in or out to
desired width.
3. Tighten the Control Knob by turning
counterclockwise.
rev. 11.27.07 cjr
1300 and 1302 Parallel Bars
'T' FITTING
5/16 X 1 1/2" BOLT
W/WASHER
UPRIGHT
1390. 1392 and 1393 Parallel Bars
WIDTH
ADJUSTABLE
FITTING
'T' FITTING
5/16 X 1 1/2" BOLT
W/WASHER
Height Adjustment
ADJUSTABLE
HEIGHT POST
LOCKING PIN
UPRIGHT
2
HANDRAIL
LOCKING PIN W/
CHAIN
PLATFORM BASE
UPRIGHT
Note: Use innermost
(4) holes to mount.
HANDRAIL
LOCKING PIN W/
CHAIN
PLATFORM BASE
UPRIGHT
Note: Use outermost
(4) holes to mount.
Width Adjustment
WIDTH
ADJUSTABLE
FITTING
LOCKING PIN
©2007 HAUSMANN INDUSTRIES, INC.
ADJUSTABLE
HEIGHT POST
ADJUSTABLE
HEIGHT POST
"T" FITTING
Advertisement
