Using the SSH-Keys section, you can also set up your device to use public key authentication when using
SSH.
5.6 Backup / Flash Firmware Page
This page will allow you to Backup your settings (and reload them) as well as flash a new firmware using a
binary file.
5.7 System Log Page
This page will allow you to access the latest entries in the system log
5.8 Kernel Log Page
This page will allow you to access the latest entries in the kernel log
5.9 Update Log Page
This page will allow you to access the latest entries in the update log as well as start an update process (if
you do so, it takes a couple of minutes before the log entries become visible - you can refresh the page
every once in a while to see if any progress was made). There is no need to click that link multiple times.
5.10 Reboot Page
The Reboot page provides you with a button to perform a reboot of the OS.
5.11 Adblock Page
The Adblock page allows you to turn adblock on/off. When on, your InvizBox Go will stop ads from
reaching your device by blacklisting (blocking) requests that are made to well known ads repositories.
5.12 Wireless Page
The Wireless page provides a more in-depth view of the Wi-Fi interfaces. Most of these fields will not work
if modified.
5.13 Diagnostics Page
The Diagnostic page allows you to use diagnostic tools such as Ping, Traceroute, Nslookup.
5.14 Realtime Graphs Section
This section consists of four pages which will all allow you to see the progression of some particular values
of your system over time. Here are the pages:
• Load - This will graph the load on your device
• Traffic - This will graph the network activity per interface
• Wireless - This will graph the signal, noise and bitrate of your wireless
• Connections - This will graph the currently active network connections
5.15 Basic Mode Link
This is a link that will enable the
really matter if you're a normal user of the InvizBox Go.
Section 5.6 Backup / Flash Firmware Page
Basic Mode Menu
and therefore simplify your UI down to the pages that
Page 23
Need help?
Do you have a question about the Go and is the answer not in the manual?
Questions and answers