Table of Contents
Advertisement
Keeping the charger plugged to the mobile phone when
the battery is fully charged will not damage the
battery. The only way to turn off the charger is to
unplug it, so it is advisable to use an easily accessible
AC power socket.
If you do not intend to use your phone for several days,
we recommend that you remove the battery.
You can use the phone while it is charging (note that
the vibra alert goes off when the charger is connected).
If the battery is completely flat, the battery icon will
only reappear after a few minutes of charging.
Insert a micro SD Card
1. Lift up the micro SD card cover on the left-hand
side of your phone. If held properly, the card's
gold contacts will be facing upwards.
2. Gently slip the card into the micro SD card slot
and press it down until the card locks into place.
To remove the micro SD card, push down the card
into its slot and release it. The card will spring out of
the slot.
Getting Started
Setting hotkeys
You can configure the numeric keys 2 - 9, +, -, <,
>, L and R to access your favorite features. Once
they have been set, you can simply long press the
numeric key to access the corresponding features.
Majority of the hotkeys have been preset and
configured. To check the hotkey settings, go to
General
Shortcuts
> Hotkey. To change the hotkey
>
setting, press the numeric key you wish to change and
Options
> Change, then select a feature to be
select
associated with the numeric key from the following list:
• Alarm
• Calendar
• Voice Memo
• Inbox
• Bluetooth
• Calculator
• Firewall
• Languages
• Call list
• Camera
Settings
• Flight mode
• Games
• Homepage
• Infrared
• Menu
• Music
• My Files
• Profiles
• Ringtones
• Shortcuts
11
>
Advertisement
Table of Contents
