Troubleshooting - Philips CT5398/AOUSARP2 User Manual

Troubleshooting

Remove and reinstall the bat-
The phone does not
tery (see page 8). Then charge
switch on
the phone until the battery
icon has stopped flashing. Fi-
nally, unplug from the charg-
er and try to switch the
mobile on.
The display shows Somebody tried to use your
phone but didn't know the
BLOCKED when
PIN code nor the unblocking
you switch on
code (PUK). Contact your
service provider.
The network connection is
The and
lost. Either you are in a radio
symbols are not dis-
played shadow (in a tunnel or be-
tween tall buildings) or you
are outside the network cover-
age area. Try from another
place or contact your network
operator for assistance/infor-
mation about the network.
Troubleshooting
The display responds more
The display doesn't
slowly at very low tempera-
respond (or the dis-
play responds slow- tures. This is normal and does
not affect the operation of the
ly) to key presses
phone. Take the phone to a
warmer place and try again.
In other cases please contact
your phone supplier.
Press and hold
Your phone doesn't
switch off the phone, check
return to the idle
screen that the SIM card and the bat-
tery are installed correctly,
and switch it on again.
This feature is network and
Your phone doesn't
display the phone subscription dependent. If the
network doesn't send the call-
numbers of incoming
er's number, the phone will
calls
display
your operator for detailed in-
formation on this subject.
Some networks don't allow
You can't send text
message exchanges with other
messages
networks. Contact your oper-
ator for detailed information
on this subject.
c
, or
Call 1 instead. Contact
97