Table of Contents
Advertisement
Profiles
A profile is a set of parameters that will be used for a
WAP connection. This menu allows you to select one
of the available profiles, then define or change the
connection settings for each of them (press
to select / deselect). Press
Active
the following options:
To rename the selected profile.
Profile
name
To enter the IP address used for the
IP address
WAP connection.
IP port
To enter the IP port address, also
used for the WAP connection.
To enter a WAP site address, to
Homepage
which you will connect directly
when connecting using the related
profile.
To enter a value of inactivity
Linger time
timeout (in seconds), after which
you
phone
disconnect from WAP.
50
L
R
to access
Edit
will
automatically
Select
To select the type of connection that
mode
will be established: Auto,
Bearer
Bearer. If the GPRS network
GPRS
isn't available upon connection, a
message will ask you if a CSD
connection should be made instead.
CSD bearer
To select one of the CSD profiles
you have set in
>
Bearer settings
(see page 24).
GPRS
To select one of the GPRS profiles
you have set in
bearer
>
Bearer settings
(see page 24).
WAP push setting
To set
or
the automatic reception of messages
On
Off
automatically sent to you by the network and / or by
your operator.
Push messages include URL links for quick access to
the corresponding WAP services: a single click on the
WAP Push message will connect to the WAP site for
browsing or downloading multimedia files into your
handset.
CDS
(over the GSM network) or
Settings
>
Network
>
CSD settings
>
Settings
Network
>
GPRS settings
Operator services
Advertisement
Table of Contents
