Bluetooth Setting; Pair And Use A Bluetooth Audio Accessory; Bluetooth Headset; Pairing Process - Philips CT9889/EBUS10II User Manual

Bluetooth setting

This menu allows you to set and manage the options relating to Bluetooth. In
order to communicate with the different wireless devices you will be using,
Bluetooth Settings
Bluetooth must be set in stand-by mode. To change the default value of the
stand-by duration time (set to 15 mn), proceed as follows:
1
2
When the stand-by duration time is over, stand-by mode is automatically
reactivated when receiving a call or by pressing the configured hotkey (see
"Hotkeys" page 32).
L

Pair and use a Bluetooth audio accessory

Bluetooth headset

This menu allows you to launch the pairing process with a Bluetooth headset.
Bluetooth devices must first be paired to each other (e.g the headset to your
BT headset
mobile phone) before being used together; this process must be performed at
least once for two specific devices to communicate and is described below.

Pairing process

1
L
2
L
C
Press and select Buetooth,
,
press .
4 6
Press or
15 mn, 1 hour or Always
Your mobile phone will NOT answer the Bluetooth connection requests of
wireless devices and accessories if the stand-by duration time is set to Off. We
advise you to turn Bluetooth
consumption.
Turn both the mobile phone and the headset on and place them near each
other (refer to the headset documentation for information on pairing).
When turned on, the headset beeps or flashes. We recommend that you do not
wear the headset on your ear while proceeding with authentification process.
C
Press on your mobile phone and select Bluetooth,
Bluetooth Headset,
the screen, showing that your mobile is searching the headset.
Pairing authentification should take place within 10 seconds. If it fails, you should
switch the headset into authentification mode again, as described above.
Bluetooth
to change the duration time and set it either to Off,
on. Then press
Off when not using it, as it increases energy
,
Detect and press
Setting, Bluetooth On/Off
,
to confirm.
Bluetooth
. An animated icon appears on
Bluetooth
features
and
Settings,
71