Introduction
Overall Flow
Preparation before Operations
STEP 1: Checking the Package Contents (P. 4)
STEP 2: Checking the Necessary Files (P. 4)
STEP 3: Writing a Memo with the VersaWorks Settings (P. 4)
Switching the Ink
STEP 1: Updating the BN-20 Driver (P. 5)
STEP 2: Updating the Utility (P. 10)
STEP 3: Updating the Printer Unit Firmware (P. 10)
STEP 4: Ink Path Cleaning (P. 11)
STEP 5: Cleaning of the Periphery of the Print Heads (Manual Cleaning) (P. 12)
STEP 6: Replacing the Wiper and Felt Wiper (P. 13)
STEP 7: Filling the Printer with New Ink (P. 14)
STEP 8: Bidirectional Printing Correction (P. 14)
STEP 9: Correcting Misalignment of the Printing and Cutting Positions (P. 14)
STEP 10: Updating VersaWorks (P. 15)
Changes and Precautions
Important: Changes and Precautions after Switching the Ink (P. 19)
3
ECO-SOL MAX 3 Ink Switching Method