Advertisement
NOTE: Read the entire instruction manual before you start installation and assembly.
WARNING
• Do not begin the installation until you have read and understood all the instructions and
warnings contained in this installation sheet. If you have any questions regarding any of
the instructions or warnings, please contact your local distributor.
• This mounting bracket was designed to be installed and utilised ONLY as specified in this
manual. Improper installation of this product may cause damage or serious injury.
• This product should only be installed by someone with good mechanical ability who has
basic building experience and fully understands this manual.
• Make sure that the supporting surface will safely support the combined weight of the
equipment and all attached hardware and components.
• Always use an assistant or mechanical lifting equipment to safely lift and position the
equipment.
• Tighten screws firmly, but do not over tighten. Over tightening can cause damage to the
items, This greatly reduces their holding power.
• This product is intended for indoor use only. Using this product outdoors could lead to
product failure and personal injury.
Required for Installation
1
Component Checklist
IMPORTANT:
Ensure that you have received all parts according to the component checklist prior to installation.
If any parts are missing or faulty, telephone your local distributor for a replacement.
wall plate
A
left pop-out
adapter bracket
right pop-out
C
Package M
M5x14
M6x14
M-A
M-B
M8x30
washer
M-E
M-F
Package W
ST6.3x55
W-A
connecting plate
M5x8
B
E
adapter bracket
plastic locking piece
D
F
M8x20
M6x30
M-C
M-D
small spacer
big spacer
M-G
M-H
concrete anchor
D6 washer
W-B
W-C
2
Advertisement
