Advertisement
Turn on with an external switch & Program external buttons instructions
The Tellus 5, Tellus 4 and Mobi 2 both have two user programmable buttons. These
buttons by default control Volume UP and Volume DOWN however they can be
programmed to send a macro or key press, start a program or perform other Windows
functions.
Tellus 5
To configure the buttons you will need to adjust the settings in Jabbla tools by following
the steps below:
1. The Jabbla tools program is
located in the Windows desktop
tray. Using a mouse or stylus
right click on the
bring up the menu below.
2. Select Configure back buttons and the
following dialogue box will open.
3. Here you can choose the function that
you would like the buttons to perform
when
pressed.
functions please refer to your device
manual.
___________________________________________________________
ZYTEQ pty ltd PO Box 190South Melbourne Victoria 3205
Ph: 03 9696 2944 Fax: 03 9696 1755 Freecall:1800 818 353
Email:
info@zyteq.com.au
icon to
For
more
advanced
Website:
www.zyteq.com.au
Tellus 4, Tellus 5 and Mobi 2
Tellus 4 / Mobi 2
A.B.N. 81132 895 268
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Zyteq Tellus 4
Summary of Contents for Zyteq Tellus 4
- Page 1 Tellus 4, Tellus 5 and Mobi 2 Turn on with an external switch & Program external buttons instructions The Tellus 5, Tellus 4 and Mobi 2 both have two user programmable buttons. These buttons by default control Volume UP and Volume DOWN however they can be programmed to send a macro or key press, start a program or perform other Windows functions.
- Page 2 2. Select Tellus 5, Tellus 4 or Mobi 2 options and the following dialogue box will open. 3. Next to Switch 1 starts device select the amount of time that the switch should be pressed before the device turns on.
Need help?
Do you have a question about the Tellus 4 and is the answer not in the manual?
Questions and answers