Zyteq Tellus 5 User Manual

Tellus 5 - Using JabblaIR with The Grid 2 and Grid 3 for Environmental Control
This guide provides information on setting up environmental control on the Tellus 5 for Grid
2 and Grid 3.
The environmental control unit contained in the Tellus 5 is called JabblaIR. JabblaIR works in
a similar way to other environmental control modules in that it allows you to record and
send infrared (IR) signals to control appliances such as televisions, DVD players and infra-red
remote controlled toys. Recorded infrared signals can then be transmitted from the Tellus 5.
On the Tellus 5 the IR receiver is located on the front of the device in the top right hand
corner. The IR receiver is where you will point the remote control that you are trying to
record.
IR Receiver
The Tellus 5 IR transmitter is located on the back of the device. Like all IR remote controls,
this transmitter must have a direct line of sight to the device (e.g. TV) that you want to
IR Transmitter
control.
When recording remote controls it is highly recommended to have brand new, good quality
batteries installed in the remote control.
__________________________________________________________
ZYTEQ pty ltd PO Box 190 South Melbourne Victoria 3205
Ph: 03 9696 2944 Fax: 03 9696 1755 Freecall: 1800 818 353
Email: info@zyteq.com.au Website: www.zyteq.com.au A.B.N. 81132 895 268