Cleaning Optical Components; Cleaning The Fan And Air Vents - XBLACK XL600 User Manual

coated surfaces are fragile and easily scratched. Do not use solvents that can damage
plastic or painted surfaces.
Inspect the air filters regularly and clean before they become clogged. Replace the air

filters with new ones when replacing the lamp.
To maintain adequate cooling, dust must be cleaned from the fans and air vents

periodically.
12.2

Cleaning optical components

Disconnect the fixture from power and allow the components to cool completely.

Remove the head cover.
Vacuum or gently blow away dust and loose particles with compressed air.

Remove stuck particles with an unscented tissue or cotton swab moistened with glass

cleaner or distilled water. Do not rub the surface: lift the particles off with a soft
repeated press.
Remove smoke and other residues with cotton swabs or unscented tissues moistened

with isopropyl alcohol. A commercial glass cleaner may be used, but residues must be
removed with distilled water. Clean with a slow circular motion from center to edge.
Dry with a clean, soft and lint-free cloth or compressed air.
12.3

Cleaning the fan and air vents

Remove dust from the fans and air vents with a soft brush, cotton swab, vacuum, or

compressed ai
19