Contents Safety information......................4 Product introduction......................7 Fixture dimensions......................7 Pan/Tilt Scan.......................7 Technical Feature........................8 Power Supply......................8 Input Power.........................8 Lamp Source.......................8 Color System......................8 Effects......................... 8 Control & Programming..................... 8 Fixture Body....................... 8 Moving Feature......................9 Electronics........................9 3.10 Weight.........................9 Function Introduction....................... 10 Color filters.......................10 Gobo.........................
Page 3
AC Power Supply......................16 Fuses......................... 16 Power connection......................15 Replace Power Cable....................16 DMX Channels......................20 Maintenance........................18 10.1 Cleaning........................18 10.2 Cleaning optical components..................19 10.3 Cleaning the fan and air vents.................. 19...
1. Safety information Notice: Please read the safe notices before installation, charging and maintain. Safe symbol for this manual Dangerous!May cause serious damages or even to death Dangerous!Read manual before installation and maintain Dangerous!High voltage, to avoid deadly electric shook Warning!Be care of fire Warning!Do not touch hot surface to avoid be scalded Warning!Be care of radiation to eyes, eye shade needed...
Page 5
Please cut off the power supply before you open or change accessories of the light (such as lamp and the fuse), if you don’t want to use the light, cut the power off. Make sure the fixture has ground-connect protection and use AC power supply same ...
Page 6
prohibit to stick any paper of gobo on the lens and other parts, accessories admitted by dealer only can used to change the light effect Prohibit to control the fuse or temperate-control switch illegally, replace the fuse according to the specified specification and load Avoid fall injury Don’t move the fixture alone ...
245° 270° 270° 3. Technical Feature 1.1 Power Supply AC 100~240V 50/60Hz 1.2 Input Power 800W@220V 1.3 Lamp Source Type: 680W LED lamp Average Life: More than 20000 hours. Light souce color: 6800K 1.4 Color System ...
4. Function Introduction 1.11 Color wheel Fixed Gobo Wheel Rotate Gobo Wheel Pos1 Pos2 Pos3 Pos4 Pos5...
Page 11
Pos6 Pos7 1.13 Profile system 4 independently steerable cutting blades, the cutting module can be rotated 90° overall. 1.14 CMY With CMY Promise, you can get any color you want.
5. Transport Items list The light use flight case for package, every case has one light, and also have those items as listed below: Item name UNIT Warranty card 3 pole XLR signal cable Safety Rigging qualification certificate User manual Package &...
6. Installation Fixture Installation Verify that the safety cable is undamaged and can bear at least 10 times the weight of the fixture. Verify that the structure can bear at least 10 times the weight of all installed fixtures, clamps, cables, auxiliary equipment, etc. Bolt each clamp securely to a clamp bracket with an M12 bolt (grade 8.8 or better) ...
7. Data Link Pin Define The fixture use 3-pin XLR cable for DMX input and output. Use a cable conforming to specifications EIA RS-485: 2-pole twisted, shielded. Pin 1 Shield Pin 2 Signal – Pin 3 Signal + Data connect Connect the DMX data input from the controller to the light 3-pin input (male) ...
reflect and cause interference. If a splitter is used, terminate each branch of the link. This fixtures introduced before 1997 have reversed polarity data sockets (pin 2 hot and pin 3 cold). The socket polarity is labelled. Use a phase-reversing cable between any device with reversed polarity.
Make sure the cable at the correct position and press tightly. L-brown N-Blue –Yellow/Green Installing the plug and roll the cover tightly Connecting appropriate ground touch 3 pins plug to the other side 9. DMX Channels XL600 39CH 34CH Function Mode1...
Page 17
Gobo1 Select 0°---->360°(FINE IN 13CH) Gobo1 Index Rotation 0---127 128---191 CW Rotating Slow---Fast 192---255 CCW Rotation Fast---Slow Gobo1 Index Rotation 0---255 FINE Fixed Gobo 0---4 White 5---10 Gobo1 11---16 Gobo2 17---22 Gobo3 23---28 Gobo4 29---34 Gobo5 35---40 Gobo6 41---46 Gobo1Shake Slow--->-Fast 47---52 Gobo2 Shake Slow--->-Fast 53---58...
coated surfaces are fragile and easily scratched. Do not use solvents that can damage plastic or painted surfaces. Inspect the air filters regularly and clean before they become clogged. Replace the air filters with new ones when replacing the lamp. To maintain adequate cooling, dust must be cleaned from the fans and air vents ...