Advertisement
Using Your Curler (cont.)
5.
Take one section of hair at a time. Sections should be 1 in
/ 2–3 cm in width, and between shoulder length to 26 in /
65 cm in length
brushing or combing through the section (from scalp to
hair ends).
6.
Make sure the front side of the curler is facing towards
your head
inside the heating chamber, through the circular area on
the curler
shoulder
length
–
26 in /
65 cm
Figure 1.1
7.
Press and hold the Rotate Button to curl the section of
hair.
Note:
• If the curler pulls on your hair at the roots, then the hair
is in the wrong position. Pull the curler in the direction
of the ends of your hair. If the curler still pulls on your
hair incorrectly, then stop pressing the Rotate Button and
release your hair.
• If your hair is stuck in the curler, follow these steps.
1.
Release the Rotate Button. Turn the curler off.
Pull the curler straight down. If your hair is stuck firmly,
2.
you may need to use some force.
3.
After hair is released, turn on the curler and press the
Rotate Button to allow the heating plates to rotate back
to the correct position.
8
[Figure
1.1]. Keep the section smooth by
[Figure
1.2]. Place the hair between the prongs
[Figure
1.3].
1 in / 2–3 cm
Figures 1.2 & 1.3
Advertisement
