Chain Dialing; Using Your Phonebook; Store A Contact In The; Phonebook - Philips SE4552B/17 User Manual

very high level. Make sure the handset is
not too close to your ear.
During a call, press l to activate
the loudspeaker mode.
Press l again to return to
deactivate the loudspeaker mode.
8.5

Chain dialing

This feature allows you to dial an
extension to a number already saved in
the phonebook during a call.
Press t or l on the handset to
take the line. Then, press o
Option and then o Select to
enter the phonebook name list.
Scroll n to a phonebook entry.
Press o Select.
• The first part is dialed.
Enter the extension.
8.6

Using your Phonebook

Your phone can store up to 100
phonebook memories. Each phonebook
entry can have a maximum of 24 digits
for the phone number and 14 characters
for the name.
All names and numbers in the
phonebook must be unique.
Note
If you have more than one handset, the
phonebook can only be accessed by one
user at a time.
Use more of your phone

8.6.1 Store a contact in the

phonebook

Press m in idle mode.
Phonebook is highlighted; press
o Select.
New Entry is highlighted; press
o Select.
Enter Name is displayed. Enter
the name of the contact (maximum
14 characters) and press o OK.
Enter Number is displayed. Enter
the number (maximum 24 digits)
and press o OK.
• A validation tone is emitted.
Note
• Press c Clear to delete the last
digit or character entered or long
press to delete all.
• To return to the previous menu, press
c Back.
Tip
You cannot store a new phonebook
entry when the memory is full. In this
case, you have to delete existing entries
to make space for new entries.

8.6.2 Access phonebook

Press d in idle mode and scroll
n to browse the phonebook. (You
can also access the phonebook
through the menu mode. m ➝
Phonebook ➝ List)
• The phonebook entries will be
listed in alphabetical order.
To view the details, press o
View.
35