Install Your Phone - Philips CD1503B/05 User Manual

bracket.
2
Turn the bracket upside down and
then re-insert the bracket to the
back of the base station.
3
Insert screws (not included) into the
wall.
4
Align the mounting holes on the
back of the base with the screws on
the wall.
5
Slide the base down into place.
Getting started
3.3

Install your phone

Before using the handset, the batteries
have to be installed and fully charged.
3.3.1 Install battery
!
Warning
Always use AAA rechargeable batteries
supplied with your unit. There could be
risk of battery leakage if you use alkaline
batteries or other battery types.
1
Slide out the battery cover.
2
Place the batteries in the correct
polarity as indicated and replace the
cover.
3.3.2 Charge battery
!
Warning
The handset must be charged for at least 24
hours before using it for the first time.
When the battery level becomes low, the
low battery sensor alerts you by sounding an
audible tone and blinking the battery icon.
If the battery level becomes exceedingly
low, the phone automatically switches off
shortly after the alert and any function in
progress will not be saved.
11