Subscribe to Our Youtube Channel
Related Manuals for Catler KM 8020
Summary of Contents for Catler KM 8020
-
Page 1: Stand Mixer
STAND MIXER Instruction Manual STAND MIXER Návod k obsluze KUCHYŇSKÝ ROBOT Návod na obsluhu KUCHYNSKÝ ROBOT К KM 8020... - Page 2 STAND MIXER...
-
Page 3: Table Of Contents
CONTENTS CATLER RECOMMENDS SAFETY FIRST KNOW YOUR STAND MIXER KM 8020 STAND MIXER description Description of accessories OPERATING YOUR STAND MIXER KM 8020 Before fi rst use Speed control Use with the blending beaker Using the meat grinder Using the cutting and grating attachment... - Page 4 Congratulations on the purchase of your new KM 8020 stand mixer. CONGRATULATIONS...
-
Page 5: Catler Recommends Safety First
CATLER RECOMMENDS SAFETY FIRST We understand the importance of safety and that’s why we put your safety fi rst from the initial design concept to the production itself. Nevertheless, please be careful and follow the instructions below when using this appliance. - Page 6 Otherwise, there is a risk of personal injury. • Before connecting this appliance to a power socket, make sure the voltage stated on the product's rating label corresponds to the voltage in your power socket. CATLER RECOMMENDS SAFETY FIRST...
- Page 7 • Allow hot liquids or food to cool down before processing. • Do not attempt to grind bones, nut shells or other hard ingredients. CATLER RECOMMENDS SAFETY FIRST...
- Page 8 • If you need to wipe the inside of the bowl or the attachments, turn the appliance off and disconnect it from the mains. Wait until the CATLER RECOMMENDS SAFETY FIRST...
- Page 9 • Do not disconnect the appliance from the power socket by pulling the power cord. This could damage the power cord or the power socket. Disconnect the cord from the power socket by gently pulling the plug of the power cord. CATLER RECOMMENDS SAFETY FIRST...
- Page 10 Do not use the appliance if it is damaged in any way or if the power cord or plug is defective. All repairs or adjustments must be performed at the nearest Catler authorised service centre. • Any maintenance other than standard cleaning must be performed at authorised Catler service centre.
- Page 11 We recommend to install a residual current device (with a nominal residual operating current of no more than 30mA) in the electric circuit in which your appliance is to be connected. For further expert advise, please contact your electrician. CATLER RECOMMENDS SAFETY FIRST...
-
Page 12: Know Your Stand Mixer Km 8020
KNOW YOUR STAND MIXER KM 8020 STAND MIXER DESCRIPTION 1. Protective cover for the fi lling opening 8. Lock button to lift and lower the tilt-back 2. Filling funnel head 3. Locking screw 9. Stand mixer base 4. Front cover 10. - Page 13 15. Kneading hook 16. Beater blade 17. Whisk 18. Blending beaker lid 19. Yolk and egg white separator 20. Grater KNOW YOUR STAND MIXER KM 8020...
-
Page 14: Description Of Accessories
DESCRIPTION OF ACCESSORIES MEAT GRINDER 1. Grinding chamber 2. Filling funnel 3. Plunger 4. Hopper 5. Screw shaft 6. Grinding blade 7. Grinding discs 8. Screw ring KNOW YOUR STAND MIXER KM 8020... - Page 15 CUTTING AND GRATING ATTACHMENT 1. Grating attachment 2. Filling funnel 3. Plunger 4. Coarse grater 5. Fine grater 6. Fine slicer 7. Coarse slicer KNOW YOUR STAND MIXER KM 8020...
-
Page 16: Operating Your Stand Mixer Km 8020
OPERATING YOUR STAND MIXER KM 8020 BEFORE FIRST USE WARNING! Before fi rst use, remove all packaging To prevent serious and advertising labels / stickers from the appliance. Make sure you have removed all injury, keep your accessories from the package. -
Page 17: Speed Control
If you need to pause the appliance operation, set the speed control dial to “0”. about 10 minutes. OPERATING YOUR STAND MIXER KM 8020... -
Page 18: Use With The Blending Beaker
- see table below. 2. In order to lower the tilt-back head, press 5. You can add ingredients through the lock button and lowly lower the tilt- the fi lling hole. Also, the protective back head. OPERATING YOUR STAND MIXER KM 8020... - Page 19 - Final mixing of the dough for cake, doughnuts etc. - Mixing the dough for pies Whipping Suitable for: - Whipping cream, egg whites and toppings Fast whipping Suitable for: - Whisking small amounts of cream or egg whites OPERATING YOUR STAND MIXER KM 8020...
- Page 20 The whisk can be unscrewed or screwed at the top of the whisk. If you need the whisk to be placed higher in the container, turn the screw clockwise. OPERATING YOUR STAND MIXER KM 8020...
-
Page 21: Using The Meat Grinder
9. Now insert the power plug into a power socket. 10. Put the raw materials to be processed in the hopper and put a container for the processed food under the grinder’s outlet. OPERATING YOUR STAND MIXER KM 8020... -
Page 22: Using The Cutting And Grating Attachment
16. Clean the meat grinder and the stand injured with their mixer according to the instructions in the “Care and Cleaning” section. edge. OPERATING YOUR STAND MIXER KM 8020... - Page 23 "0", wait until the rotating parts have come to a complete stop. Then, unplug the power cord from the mains socket. 11. Put the bowl with the processed food aside. OPERATING YOUR STAND MIXER KM 8020...
-
Page 24: Care And Cleaning
CARE AND CLEANING Before cleaning the appliance, always CLEANING THE BASE disconnect the plug of the power cord from Wipe the base with a soft sponge lightly the mains socket and let it to cool down dipped in warm water with a small amount properly. - Page 25 WARNING! When handling the grinding blade, be very careful not to get injured with its edge. DISASSEMBLING AND CLEANING THE CUTTING AND GRATING ATTACHMENT When the cutting and grating attachment has been removed from the stand mixer, carefully remove the grater the grinding chamber.
-
Page 26: Troubleshooting
TROUBLESHOOTING In this chapter you will fi nd the most common problems you may encounter when using this appliance. If your problem is not listed here or is listed and persists, stop using the appliance, disconnect the power plug from the power outlet and contact an authorized service centre. - Page 27 INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF USED PACKAGING MATERIALS Dispose of packaging material at a public waste disposal site. DISPOSAL OF USED ELECTRICAL AND ELECTRONIC APPLIANCES The meaning of the symbol on the product, its accessory or packaging indicates that this product shall not be treated as household waste.
Need help?
Do you have a question about the KM 8020 and is the answer not in the manual?
Questions and answers