Related Manuals for Catler KM 8012
Summary of Contents for Catler KM 8012
- Page 1 Instruction Manual STAND MIXER Návod k obsluze KUCHYŇSKÝ ROBOT Návod na obsluhu KUCHYNSKÝ ROBOT Használati útmutató KONYHAI ROBOTGÉP KM 8012...
- Page 2 STAND MIXER...
-
Page 3: Table Of Contents
CONTENTS CATLER RECOMMENDS SAFETY FIRST KNOW YOUR STAND MIXER KM 8012 Stand mixer description Description of accessories OPERATING YOUR STAND MIXER KM 8012 Before fi rst use Tilt-back head Turning on and off Speed control Using with the blending beaker... - Page 4 CONTENTS CATLER RECOMMENDS SAFETY FIRST KNOW YOUR STAND MIXER KM 8012 Stand mixer description Description of accessories OPERATING YOUR STAND MIXER KM 8012 Before fi rst use Tilt-back head Turning on and off Speed control Using with the blending beaker...
-
Page 5: Catler Recommends Safety First
CATLER RECOMMENDS SAFETY FIRST We understand the importance of safety and so from the initial design concept to production itself we focus primarily on your safety. Nevertheless, please be careful and follow the instructions below when using this appliance. • This appliance may be used by children 8 years... - Page 6 Prior to disassembling the appliance and replacing accessories or accessible parts that move during use, wait until all moving parts come to a stop. • This appliance is designed for household use only. This appliance is not designed for CATLER RECOMMENDS SAFETY FIRST...
- Page 7 • For safety reasons, this appliance is equipped with a safety mechanism that prevents the motor from being started if the appliance is incorrectly assembled or the tilt-back head is lifted. CATLER RECOMMENDS SAFETY FIRST...
- Page 8 An injury could occur or the appliance could be damaged. • If any item such as a spoon or a wooden spoon falls into the blending beaker while the appliance is in operation, press the power On/ CATLER RECOMMENDS SAFETY FIRST...
- Page 9 • Do not disconnect the appliance from the power socket by pulling the power cord. This could damage the power cord or the power CATLER RECOMMENDS SAFETY FIRST...
- Page 10 Do not use the appliance if it is damaged in any way or if the power cord or plug are defective. All repairs or adjustments must be performed at the nearest Catler authorised service centre. CATLER RECOMMENDS SAFETY FIRST...
- Page 11 • Any maintenance other than standard cleaning must be performed at authorised Catler service centre. • We recommend to install a residual current device (standard safety switches in your power outlet) to provide a higher level of protection when using the appliance. We recommend to install a residual current device (with a nominal...
-
Page 12: Know Your Stand Mixer Km 8012
KNOW YOUR STAND MIXER KM 8012 STAND MIXER DESCRIPTION 1. Drive shaft 2. Locking screw 3. Front cover 4. Tilt-back head 5. Speed control 6. Display 7. Lock button to lift and lower the tilt-back head 8. Power On / Off button 9. -
Page 13: Description Of Accessories
4. Screw ring 5. Hopper 6. Grinding blade 7. Grinding discs 8. Plunger 9. Plunger cover SAUSAGE ATTACHMENT 1. Wiener attachment 2. Sausage attachment 3. Attachment cover 4. Separator COOKIE ATTACHMENT 1. Cookie attachment 2. Mold KNOW YOUR STAND MIXER KM 8012... - Page 14 CUTTING AND GRATING ATTACHMENT 1. Grating attachment 2. Filling funnel 3. Plunger 4. Fine grater 5. Slicer 6. Coarse grater PASTA ATTACHMENT 1. Pasta sheet roller attachment 2. Fettuccine pasta attachment 3. Spaghetti attachment KNOW YOUR STAND MIXER KM 8012...
-
Page 15: Operating Your Stand Mixer Km 8012
OPERATING YOUR STAND MIXER KM 8012 BEFORE FIRST USE NOTE Before fi rst use, remove all packaging The appliance will automatically and advertising labels / stickers from the switch to stand-by mode after about appliance. Make sure you have removed all 5 minutes of inactivity. -
Page 16: Using With The Blending Beaker
Also, the protective cover prevents the raw materials from splashing out of the beaker. 11. If you need to wipe the inside of the bowl, set the speed dial control to “0”, OPERATING YOUR STAND MIXER KM 8012... -
Page 17: Using The Meat Grinder
10 minutes. Then, turn the stand front cover. mixer off and let it cool down for 6. Insert the assembled meat grinder in the about 10 minutes. hole on the till-back head (with the screw shaft end pointing forward). OPERATING YOUR STAND MIXER KM 8012... - Page 18 2.5 x 2.5cm. We do not recommend to process frozen meat. Never process bones, sinews etc. OPERATING YOUR STAND MIXER KM 8012...
-
Page 19: Using The Sausage Attachment
9. Insert the hopper on the fi lling funnel. 10. Now insert the power plug into a power socket. 11. Press the button. A sound is made and “0” speed and “00:00” time will be shown. OPERATING YOUR STAND MIXER KM 8012... -
Page 20: Using The Cookie Attachment
13. Insert one hand under the attachment outlet while pushing the dough through the fi lling funnel with the other using the plunger. Cut the cookies with the knife as needed and put them on the baking sheet. OPERATING YOUR STAND MIXER KM 8012... -
Page 21: Using The Cutting And Grating Attachment
The cookie dough should not be too 3. Release the lock screw and remove the much thin. front cover. 4. Insert the assembled cutting and grating attachment in the hole on the tilt-back head. OPERATING YOUR STAND MIXER KM 8012... - Page 22 . Then, unplug the power cord from the mains socket. 12. Put the bowl with the processed food aside. OPERATING YOUR STAND MIXER KM 8012...
-
Page 23: Using The Pasta Attachment
Carefully remove the attachment from the tilt-back head and put it on the countertop or in the sink. Insert the front cover in the hole on the tilt-back head and tighten the joining screw. OPERATING YOUR STAND MIXER KM 8012... -
Page 24: Care And Cleaning
CARE AND CLEANING Before cleaning the appliance, always CLEANING THE BASE disconnect the plug of the power cord from Wipe the base with a soft sponge lightly the mains socket and let it to cool down. dipped in warm water with a small amount of neutral washing-up liquid. - Page 25 DISASSEMBLING AND CLEANING THE WARNING! CUTTING AND GRATING ATTACHMENT When the cutting and grating attachment When handling the has been removed from the stand mixer, carefully remove the grater the grinding grinding blade, be chamber. Wash all the parts including the very careful not to plunger in warm water with a small amount of neutral washing-up liquid.
- Page 26 Remove the lid and insert all accessories step-by-step in the free space. This will prevent possible injury by the grinding blade as well as the accessories from being lost. CARE AND CLEANING...
- Page 27 INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF USED PACKAGING MATERIALS Dispose of packaging material at a public waste disposal site. DISPOSAL OF USED ELECTRICAL AND ELECTRONIC APPLIANCES The meaning of the symbol on the product, its accessory or packaging indicates that this product shall not be treated as household waste.
Need help?
Do you have a question about the KM 8012 and is the answer not in the manual?
Questions and answers