Table of Contents
Advertisement
Available languages
Available languages
Quick Links
Advertisement
Table of Contents
Summary of Contents for Hadex MPPT Series
- Page 1 MPPT SOLÁRNÍ REGULÁTOR 12-24V/20A/40A/60A G925/G927/G929 Návod k použití...
- Page 2 Vážený zákazníku D kujeme za d v ru. Nákupem jste získal spolehlivý a vysoce kvalitní výrobek, který poskytne dobrou službu po dlouhou dobu pokud bude používán doporuþeným zp sobem. P eþt te si peþliv tento návod, abyste se seznámil s výrobkem ješt p ed použitím. Dozvíte se d ležité informace o provozu a údržb tohoto za ízení.
- Page 3 Poznámky k baterii • Použití nesprávn dimenzované baterie znamená riziko pro život, majetek i prost edí. Vždy dodržujte bezpeþnostní instrukce výrobce baterií! • olov né baterie obsahují agresivní korozní kyselinu. Chra te oþi a k ži p ed kontaktem s jakoukoli kapalinou z baterie! Nikdy nerozebírejte olov né...
- Page 4 LCD displej: Hlavní okno Nap tí baterie LCD displej stav 1 Nabíjecí proud LCD displej stav 2 Proud do zát že LCD displej stav 3 Úhrnný nabíjecí proud Ah LCD displej stav 4 Úhrnný proud do zát že Ah LCD displej stav 5 Nastavení...
- Page 5 Vlastnosti: • MPPT, optimalizuje úþinnost • Automatická identifikace provozního nap tí systému (12/24V or 48V) • Rozsah vstupního nap tí od 22-60V/30-90V/70-150V • Úprava nabíjecích hodnot v závislosti na teplot . • Step-up funkce • Ochrana proti hlubokému vybití • Ochrana proti p ebíjení •...
- Page 6 1. P ipojení baterie P ipojte baterii k MPPT solárnímu regulátoru pomocí p íslušných šroubovacích svorek. K p ipojení použijte kabel správn dimenzovaného pr ezu, aby se kabel zbyteþn neoteploval a aby na kabelu nedocházelo k úbytku nap tí. Šroubovací svorky jsou navrženy na max.
- Page 7 Ochrana proti p epólování MPPT solární regulátor je chrán n proti p epólování, tj. nesprávnému p ipojení baterie. Vždy peþliv zkontrolujte polaritu p i p ipojování baterie. Regulátor se sám resetuje po odstran ní závady a je op t p ipraven ke správnému p ipojení. Vým na vnit ní...
- Page 8 MPPT SOLAR CHARGE CONTROLLER 10A/20A/30A/40A/50A/60A USER’S MANUAL...
- Page 9 THE IMAGE SHOWN HERE IS INDICATIVE ONLY, PLS REFER TO THE ACTUAL PRODUCT.
-
Page 10: Dear Customer
Intended use The solar charge controller of the MPPT series was developed to charge lead batteries in a solar stand-alone system. The product is designed for private use only and not suitable for commercial use. The user must ensure that the device is protected against humidity and damp. Any other use than described before may damage this product;... -
Page 11: Operation
General For safety and technical approval reasons(CE), the unauthorized conversion and /or modification of the product is not permitted. This device is not a toy and must not be used by children! Please ensure childproof operation and storage of the device at any time. Maintenance, installation or repair works may only be performed by an expert/qualified workshop. -
Page 12: Notes On The Battery
Avoid sudden different in temperature! This may cause the formation of condensation water in the solar charge controller! In this case, the solar charge controller must be adjusted to the new ambient temperature before start at a well-ventilated place for at least one hour. Notes on the battery If used improperly, lead batteries are a high risk for humans, animals and the environment. -
Page 13: Connection And Display Elements
Connection and display elements 10A-60A MPPT solar charge controller 1.USB output port 2. Solar panel input terminals 3. Battery connect terminals 4. DC load output connect terminals 5.Menu button 6.Load ON/OFF button 7.Setting button(UP) 8.Setting button(DOWN) LCD Screen Display Functions (LCD series only) The MPPT controller is equipped with a big LCD display panel and 4 buttons. - Page 14 LCD screen display explanation: Main window Battery voltage Main Menu LCD screen displays PV charging current state No.1 LCD screen displays Load's discharge current state No.2 LCD screen displays Total PV charge Ah state No.3 LCD screen displays Total battery discharge Ah state No.4 LCD screen displays The setting of equalization charge voltage:If you long...
- Page 15 system,22V in 24 system. 12V system: the setting range is from 10.4V to 11.4V 24V system: the setting range is from 20.8V to 22.8V LCD screen displays The setting of low voltage reconnecting: If you long state No.7 press 5s the menu button, going into the setting station (the data flashing).By pressing the UP button, you can increase the value.
- Page 16 Buttons function explanation: When LCD screen in submenu,press it to go back to main window When LCD screen in main menu,press it to go into the submenu. When the LCD screen stay in state No.5,6 and 7,Long press 5s the button to make the data settable(data flashing) ON/OFF the DC load Press it to increase the setting value (in state NO.5,6 and...
-
Page 17: Description Of Functions
Temperature-dependent correction of charging parameters. Step-up function Deep discharge protection Overcharge protection Desulfation function (pulse charging) Temperature-activated protective circuit Reverse polarity protection Switchable load output Connection possibility of an optional remote display with SD card mounts. RS232 communication interface(optional) Power conversion efficiency: 95% Description of functions The MPPT solar charge controllers are modern, microprocessor-controlled devices which were developed for charging lead-acid batteries in solar stand-alone systems. - Page 18 Attention: If you use a solar controller whose charging power is too low, the solar controller may be damaged in the long run! Maximum module power MPPT-10A MPPT-20A MPPT-30A MPPT-40A MPPT-50A MPPT-60A 12V battery 120 watts 240 watts 360 watts 480 watts 600 watts 720 watts...
- Page 19 system components. 1.Connecting the battery with the MPPT solar controller by using the screw type terminals intended for this purpose. Make sure you use a proper cable cross section to keep the voltage drop and heating of the cables as low as possible. The screw type terminals are designed for cable cross sections of up to 16m Required minimum cross sections: 2.5m...
-
Page 20: Connecting The Solar Module
2.Connecting the solar module Connecting the solar module with the solar controller to the corresponding screw type terminals. Make sure the correct polarity! To avoid any voltage from the wires, first connect the controller, then the solar array. Note: place the positive and the negative wires close to each other to minimize electromagnetic effects. - Page 21 Deep discharge protection The solar controllers of the MPPT series are equipped with deep discharge protection ,i.e. with battery voltage decreasing to 11V, the solar controller switches the load off automatically. As soon as the battery is recharged over the solar module, the load switches on automatically.
-
Page 22: Technical Specifications
remote controller is optional. Operation with optional remote display Optionally, all models of the MPPT solar controller series maybe operated with a remote display. Technical specifications For features and intensity of current, please observe the respective type plate of your device! Model MPPT-10A,MPPT-20A,MPPT-30A,MPPT-40A,MPPT-50A,MPTT-60A Working voltage of the battery... - Page 23 the appropriate disposal center. Warranty and service agreements This warranty covers only manufacturing defects. The appliance must not be modified or altered in any way with regards to both form and function. This warranty does not apply in case of improper usage that falls beyond normal use as indicated in the user's manual or if there is damage caused by force majeure (e.g.