Dictaphone Connexions Quick Reference page 9

Using your Quick Access Keys
Burying a Quick Access Key
®
Connexions Telephone Quick Reference
TABLE 1
Press:
1. PROGM
2. Enter Security Code (if required, if not
the display at right is shown)
3. KEYS
4. Any one of the keys labeled 1 through 21
(keys 17-21 can be used if not in use for
telephone lines)
5. Enter the desired number using the
telephone keypad or another quick
access key (if required)
6. SELECT
7. To setup another quick access key,
repeat the same procedure. To exit this
mode, press STOP.
Label each Quick Access Key to indicate what has been programmed into each key.
Once you have setup a quick access key, simply press that key to activate the function.
An additional eight functions or numbers can be programmed by "Burying" them
within quick access keys 1 - 8, which already contain one programmed number.
To setup buried quick access keys 22 - 29 "under" keys 1 - 8, follow the steps in
Table 2
TABLE 2
Press:
1. PROGM
2. Enter Security Code (if required, if not
the display at right is shown)
3. KEYS
4. ACC (the – sign) followed by selected
quick access key (1-8)
Setting up Quick Access Keys
Display Prompt:
SECURITY # _ _ _ _
KEYS
SELECT PROGM KEY
ENTER NUMBER
The digits you are entering.
SELECT PROGM KEY
The Main Menu will return to the
display.
Buried Quick Access Keys
Display Prompt:
SECURITY # _ _ _ _
KEYS
SELECT PROGM KEY
ENTER NUMBER
5/25/05
ENTER
PROGRAM
ID/TIME TEL
ENTER
PROGRAM
ID/TIME TEL
9