Garmin eTrex Legend How To Use page 2

9. This page is the Menu Page.
10. Using the button on front, move up
and over until the category "Mark"
is highlighted.
11. This brings you to the Mark Waypoint Page.
12. To edit this label press in the button on front. Change this label to your name. Click OK.
14. Next, press the button on front to the right until
the category "Find" is highlighted. Press the button in.
17. Press in the button on the top right side of the unit until you come back to the Satellite Page.
18. You can also get to the Mark Waypoint Page from this or any page by pressing and holding in
the button on the front.
13. This should bring you back to the Mark Waypoint Page.
You MUST click OK on this page or your waypoint will not be saved.
15. "Waypoints" should be highlighted, press in once.
16. Highlight "By Name" and press in again.
Is the waypoint labeled with your name there? If so, you did it right!
Using the button on front, move up and over until the
label "001" is highlighted.
according to other waypoints already saved)
(note: label number may vary