Mangar Sit-u-Up Instructions For Use

T
T
The Mangar Sit-u-Up has been designed to be placed on a bed without the use of securing straps.
Power is provided by the Mangar Airflo compressor. PLEASE READ the separate Airflo compressor
instructions that are supplied separately, before fitting and using your Sit-u-Up.

STANDARD CONTENTS LIST

1 x Sit-u-Up; 1 x Spreader Bar; 1 x Headrest; 1 x Overlay (with cover); 1 x User Instructions.
Fig. 1
Headrest removed for clarity
C
Fig. 2
E
Fig. 3
MI0131 issue 3
h e M a n g
h e M a n g
Instructions for use

FITTING INSTRUCTIONS

B
• Insert the spreader bar (A fig.1).
• Slide the headrest (B fig.1) fully down to the tabs on
• Remove the pillows from the bed and place the Sit-u-Up
• Lead the air hose (D fig.1), to the side of the bed where
• Connect the Sit-u-Up air hose and the hand control as
D
A
• Inflate the Sit-u-Up by pressing 'up'
• Fit the overlay (G fig.4) to the Sit-u-Up by sliding it over
F
a r
a r
Patents Pending
each side of the backrest.
on the bed with the spreader bar positioned up against
the headboard. Fold the strut (C fig.2) towards the
headboard.
the Airflo compressor is to be placed.
indicated in the separate Airflo compressor user
instructions. A standard push button hand control
(E fig. 3) is supplied with the Airflo compressor, however,
an optional lever hand control (F fig. 3) is also available.
Place the compressor by the side or under the bed, in an
out of the way position.
control (see separate Airflo compressor instructions).
the top of the headrest.
G
1
on the hand
Fig. 4
Oct 02