Installing The Mounting Frame - Inmarsat Wideye Sabre Ranger Series Installation Manual

4 Setting Up the Mounting Frame
Follow these steps to setup the mounting frame:
1. Align the mounting frame.
2. Install four bolts with washers to secure the mounting frame together.
5

Installing the Mounting Frame

Follow these steps to install the mounting frame:
1. Place mounting frame on the back end of the SABRE
Note:
The mounting frame can be installed in the vertical or horizontal position
as shown below.
2. Orientate the mounting frame to desired position.
3. Install four allen-screws with washers to secure mounting frame to the
SABRE TM Ranger terminal.
Vertical position
7
SABRE TM Ranger Installation Guide
TM Ranger terminal.
Horizontal position