Getting Started - Inmarsat Wideye Sabre Ranger Series Installation Manual

SABRE TM Ranger Installation Guide
1

Getting Started

Congratulations on the purchase of your SABRE
When you unpack the package, please check that the following items are
present:
•
SABRE TM
•
AC/DC power adapter with power cable
•
Mounting Frame (including four allen screws with washers, four bolts
with nuts and washers)
•
Two U-bolts with four washers and nuts
•
Ethernet cable (RJ45, Cat 5 Straight, 1.5m)
•
Phone cable (RJ11, 1.8m)
•
Multi-function cable (10 metres, packed separately)
•
Heater power cable (only for SABRE
•
AC/DC power adapter with power cable (additional unit only for
SABRE
TM
•
Installation guide
•
Product CD (software utilities and documentations)
If any of the items are missing from the package, please contact your reseller
where you have purchased the SABRE
Note:
There are two variants of the SABRE
SABRE Ranger-V1:
TM
Terminal without the heater option
has only one cable gland hole on
the connector cover to connect the
Multi-function cable.
Note*:
The pictures used in this guide shows the SABRE
heater option.
Ranger terminal
Ranger-V2)*
TM
TM Ranger terminal.
Ranger-V2)*
TM
Ranger terminal package.
TM
Ranger terminal:
SABRE Ranger-V2*:
TM
Terminal with the heater option
has two cable glands holes on the
connector cover to connect the
Multi-function and Heater power
cables.
Ranger-V2 terminal with the
TM
2