Settings - Electrolux EWF1041ZDWA User Manual

• At the end of the Vapour cycle, the clothes
will be warmer, softer and detached from
the drum.
If Vapour option is selected, rinse
temperatures will be elevated.
During a vapour cycle, you may notice
vapour exiting from the drain hose of
the washing machine, this is normal
and there is no cause for alarm.

3.5 Settings

Save Favourite (
Program settings that are frequently used
can be saved (e.g. Cotton, 60°C, 1200 rpm,
with Prewash and Vapour).
To program/re-program Favourite with your
own selections and save them, proceed as
follows:
1. Put machine in Stand-By mode.
2. Select your desired wash settings.
3. To save favourite program, press and hold
"Stain" touchpad about 2 seconds and you
will hear "Bip, Bip" sound and "Favourite"
LED is flashing.
To recall the favourite wash program, turn
selector knob to "Favourite
You will get acknowledgement on the screen
when the Favourite program is loaded.
App Program cycle cannot be saved as
a Favourite on the appliance.
Child Safety Lock (
Your appliance is provided with CHILD
SAFETY LOCK which permits you to leave
the appliance unsupervised with the door
closed without having to worry that children
might be injured by or cause damage to the
appliance.
Set this option after pressing the
Start/Pause touchpad.
) Program
" program.
) Option
To set "Child Lock" option:
• To activate the function, press and
hold "Extra Rinse" touchpad about 2
seconds until the display shows the
icon " ".
If you press any touchpad while
Child Lock is activated, the icon
" " will flash on display 3 times
along with buzzer sound.
The touchpads are locked (except
for the On/Off button).
• To deactivate the function, press and
hold "Extra Rinse" touchpad about 2
seconds until the display shows the
icon " ".
This function remains enabled even
after the appliance is switched off.
Enabling/Disabling End-Of-
Wash Buzzer
This setting permits you to either enable
or disable the buzzer at the end of the
program. As an example, you might wish
to disable this buzzer when you start a
wash when going to bed, so that when
the wash finished approximately 1 hour
later, it will not disturb you through the
night.
Error warning beeps such as critical
faults are not disabled.
• To disable the buzzer sound, press
"Prewash" and "Stain" touchpads at
the same time about 3 seconds, the
" will show on display along
icon "
with buzzer sound.
• To return to default configuration press
these 2 touchpads at the same time
about 3 seconds, the icon "
show on display along with buzzer
sound.
17
" will