Electrolux EWF1041ZDWA User Manual page 15

AutoDose Liquid Detergent
Touchpad
For activating and deactivating the
automatic detergent dosing refer to
"5.2 Detergent dispenser with AutoDose
tanks and manual compartments" on
page 19.
AutoDose Fabric Softener
Touchpad
For activating and deactivating the
automatic fabric softener loading
Refer to "5.2 Detergent dispenser
with AutoDose tanks and manual
compartments" on page 19.
Remote ( ) Touchpad
This option allows you to connect
washing machine to Wi-Fi network and to
link it to your smart phone.
By this functionality you can receive
notifications, control and monitor your
washing machine from your mobile
devices.
To connect the washing machine with
your smart phone you need:
Wireless network at home with internet
connection enabled.
Smart Phone connected to wireless
network.
WI-FI specification requirements:
Frequency 2.4 GHz according to
local country regulation
Protocol
IEEE 802.11b/g/n
Max Power According to local country
regulation
When the door is open, remote
functions are disabled.
Connection setting and other
suggestions please refer to attached
leaflet of this user manual.
Delay End (
Before you start the program, this option
makes it possible to define the end of the
washing program from minimum of 1 hour
to maximum of 20 hours.
If program duration is longer than
3 hours, minimum Delay End
option starts from 4 hours.
Press the Delay End touchpad to choose
the end time as you wish. The display
shows the number of hours and the
indicator beside the touchpad is on.
This option must be selected after
choosing the wash program, and
before pressing the "Start/Pause"
touchpad.
For example, if the program duration of
your selected program is 3.20 hours and
you define the "Delay End" time to 6
hours. This means your wash program
will finish in 6 hours. (See diagram)
"Delay End" Time : 6 hrs.
Countdown
2.40 hrs.
Pressed Start the
Start/Pause Program
After selecting Delay End time, press
Start/Pause touchpad to start the
program. Machine will then countdown
and update time on the display every
hours until it reaches the starting point of
the wash cycle.
If you wish to modify or cancel Delay End
option after starting the program, follow
the steps below:
– set the washing machine to PAUSE by
pressing "Start/Pause" touchpad;
– deselect this option by pressing
"Delay End" touchpad repeatedly till
the display shows delay time "
press the "Start/Pause" to start the
–
program.
) Touchpad
Working Cycle
3.20 hrs.
End of
Cycle
";
15