H3C S5830V2 Series Installation Manual page 44

Figure 42 Rear panel (LS-5820V2-52QF-H5)
3 4
2
1
9
10
11
12
(1) USB port
(3) Barcode
(5) Fan tray slot 1
(7) Power module slot 1
(9) Console port
(11) Management Ethernet port
The S5820V2-52QF switch comes with the power module slots empty and the filler modules for the
slots as accessories. You can install one or two power modules for the switch as needed. In
40 and Figure 41, two LSVM1AC300 power modules are installed. For more information about
installing and removing a power module, see
The S5820V2-52QF switch also comes with the fan tray slots empty. You must install two fan trays of
the same model for the switch. In
For more information about installing and removing a fan tray, see
Figure 43 Left side panel
(1) Primary grounding point
5
(2) Grounding screw (auxiliary grounding point 2)
(4) Product code
(6) Fan tray slot 2
(8) Power module slot 2
(10) LINK LED for the management Ethernet port
(12) ACT LED for the management Ethernet port
"Installing/removing a power
Figure 40 and Figure 41, two LSWM1FANSC fan trays are installed.
(2) Auxiliary grounding point 1
37
6 7
module."
"Installing/removing a fan
8
Figure
tray."