Chelsio Communications DPDK Installation And User Manual page 26

Chapter 7. Classification and Filtering
fragmentation,macmatch,protocol,vnic_id,port,fcoe
fragmentation,macmatch,tos,vlan,port,fcoe
fragmentation,macmatch,tos,vnic_id,port,fcoe
fragmentation,ethertype,vlan,port,fcoe
fragmentation,ethertype,vnic_id,port,fcoe
fragmentation,protocol,tos,vlan,port,fcoe
fragmentation,protocol,tos,vnic_id,port,fcoe
fragmentation,vlan,vnic_id,port,fcoe
mpshittype,macmatch,ethertype,protocol,port,fcoe
mpshittype,macmatch,ethertype,tos,port,fcoe
mpshittype,macmatch,protocol,vlan,port
mpshittype,macmatch,protocol,vnic_id,port
mpshittype,macmatch,tos,vlan,port
mpshittype,macmatch,tos,vnic_id,port
mpshittype,ethertype,vlan,port,fcoe
mpshittype,ethertype,vnic_id,port,fcoe
mpshittype,protocol,tos,vlan,port,fcoe
mpshittype,protocol,tos,vnic_id,port,fcoe
mpshittype,vlan,vnic_id,port
7.2.3. Test CXGBE Filters Application
The test cxgbe filters application, test_cxgbe_filters, provides a command line interface to
configure Chelsio NIC packet classification and filtering features available in hardware. You will
be presented with a prompt, cxgbe, which can be then used to configure filtering features. Use
the following syntax to run the application:
[root@host~]# test_cxgbe_filters -c <coremask> -n <channels> -- -i
Where,
-c <coremask> : A hexadecimal bit mask of the cores to run on. Note that core numbering
-n <channels> : Number of memory channels per processor socket.
-i : Enable interactive mode.
Chelsio DPDK Driver for Linux
can change between platforms and should be determined beforehand.
26