Advertisement
2
1
Tips
Particularly when you are processing large quantities, we advise you not
to put all the ingredients in the filter at the same time. Start processing
a small quantity, let the appliance run for a moment, switch it off and
then add another small quantity. Repeat this procedure until you have
processed all the ingredients.
For making soy milk:
Soak soy beans for at least 4 hours before processing them.
You can process max. 145 g. (a measuring cup full) of soaked soybeans
(this is equal with 65 g. dried soybeans) with max. 650 ml. (3 measuring
cups full) water at a time.
For making fruit juices and cocktails:
For the best results add approx. 300 ml. water (or other liquid for
cocktails, etc.) to 500 g. fruit at a time.
Juice extractor
The juice extractor can be used for preparing fresh fruit juices.
Pulp, pips and skins will be separated.
C
1
Put the pulp container on the motor unit and turn it in the
direction of the arrow until it is firmly fixed.
C
2
Insert the sieve.
Always check the sieve before use. Do not use the sieve if you notice
any damage on it like cracks, fissures, opening on metal screen or loose
grater disc.
In case of a damaged sieve, contact the Philips Customer Care Centre
in your country (you will find its phone number in the worldwide
guarantee leaflet). If there is no Customer Care Centre in your country,
turn to your local Philips dealer or contact the Service Department of
Philips Domestic Appliances and Personal Care BV.
C
3
Put the lid in place and finally fasten the clamp by pushing it
down.
Make sure the clamp is on the right side of the motor unit. Check if the
lid is properly assembled and fastened.
ENGLISH
11
Advertisement
