Manually Installing The Monitor Driver - Lenovo G34w-10 User Manual

Manually installing the monitor driver

Below are steps for manually installing the monitor driver in Microsoft Windows 7,
Microsoft Windows 10.
Installing the monitor driver in Windows 7
To install the device driver in Microsoft® Windows 10, do the following:
1. Turn off the computer and all attached devices.
2. Ensure that the monitor is connected correctly.
3. Turn on the monitor and then turn on the computer. Allow your computer to boot into
4. From the Lenovo website www.lenovo.com/support/G34w_10, find the corresponding
5. Open the Display Properties window by right-clicking Start, Control Panel, Hardware and
6. Click the Change the display settings tab.
7. Click the Advanced Settings icon.
8. Click the Monitor tab.
9. Click the Properties button.
10.
11.
12.
13.
14.
15.
16.
17.
Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display
Windows 7 operating system.
monitor driver and download it to a PC to which this monitor is connected (such as a
desktop).
Sound icon, and then click the Display icon.
Click the Driver tab.
Click Update Driver, then click Browse the computer to find the driver program.
Select Pick from the list of device driver program on the computer.
Click the Have Disk button. By clicking the Browse button, browse and point to the
following path: X:\Monitor Drivers
(Where X indicates "the folder in which the downloaded driver is located" (such as a
desktop)
Select the "G34w-10.inf" file and click the Open button. Click the OK button.
Select Lenovo G34w-10 and click Next.
After the installation is complete, delete all downloaded files and close all windows.
Restart the system. The system will automatically select the maximum refresh rate
and corresponding Colour Matching Profiles.
quality. Lenovo recommends using either 3440x 1440 at a refresh rate of 144 Hz,
or 640 x 480 at refresh rate of 60 Hz.
Chapter 3 . 3-4