RUSTA Inflatable Santa 5 m Manual page 2

ENG
Thank you for choosing to
purchase a product from Rusta!
Inflatable Santa
Read the user manual carefully to make sure that the product is assembled, used and
maintained correctly, as described in the instructions in this user manual. Keep the user
manual for future reference.
PLEASE NOTE! It requires at least two people to inflate the Santa!
CONTENT
1x Santa, 5 m
1 x motor with fan
25 m anchoring cord (can be cut to any length)
6 x carabiners
6 x mooring pegs
2 x sandbags
ASSEMBLY
1. Carefully unpack the Santa from the packaging and lay it down on a flat surface. Avoid
sharp objects that could damage the material.
2. Unfold the Santa and attach the air intake tube around the fan exhaust. The air intake
is located on the bottom of the Santa. Connect securely!
3. Put the carabiners through the loops that are located around the middle of the Santa
and secure the anchoring cords.
4. Open the zips on the inside of the Santa's legs and stuff a sandbag into each foot to
make the Santa more stable.
5. Make sure that the zip in the back of the Santa is properly closed.
6. PLEASE NOTE! This stage requires at least two people:
Plug in and keep a firm grip on each side of the Santa. It takes approx. 2 minutes to
inflate the Santa. Carefully raise the Santa gradually. Make sure there is plenty of
space around the Santa (if you use the Santa indoors, the ceiling height must be at
least 5.5 m).
7. Hold the Santa upright and secure each of the anchoring cords. Adjust to get the Santa
straight and stable.
Important!
• The plug must be inserted for the Santa to remain inflated. If the fabric is damaged,
the inflate function will not work. That is why it is important to select a calm, protected
location and anchor the Santa securely.
• The fan has a natural blowing sound, which is completely normal.
2
Read through the entire manual
before installation and use!