SB-WA520GC
8.2.
Disassembly of the Speaker Unit and Checking of the P.C.B.s.
Step 1: Remove all the screws.
Step 2: Remove the stand base.
Step 3: Remove all the screws from the bottom of the speaker
unit.
Step 4: Remove the screws from the rear panel's speaker unit
guide.
Step 5: Remove the screws from the subwoofer.
· Disassembly of Power Amp unit.
Steps 6 & 7: Remove the screws.
Step 8: Pull out the Power Amp unit slightly as shown.
(Note: Be careful of attach wire at CN506).
8