Connect To A Network; Download The Prisma App - Primare NP5 Prisma User Manual

4 Connect to a network

For best results we recommend connecting via cable. The
NP5 Prisma requires one to two minutes to completely
start up; please be patient. When it's ready to be
configured the network LED will flash green or blue.
Connecting via an ethernet cable
Connect an Ethernet cable between your router and the
l
LAN socket on the back panel of the NP5 Prisma.
The network LED will flash green when the NP5 Prisma is
ready to be configured using the Google Home app.
If the network LED is flashing blue, make sure your Ethernet
cable is connected and you have a network connection.
Install the free Google Home app on your mobile
l
device.
Open the Google Home app and follow the instructions
l
for setting up the NP5 Prisma on your network in the
Chromecast Built-in Quick start Guide, or the brief
description below.
Run Google Home.
l
The Google Home app will display New device found,
NP5 Prisma.
Click set UP and follow the instructions.
l
A test sound will be played and you will be prompted to
select a name for your NP5 Prisma. If you cannot hear the
test sound you may need to increase the volume on your
amplifier.
Enter an appropriate name.
l
Once you have configured the NP5 Prisma using the
Google Home app the network LED will change from
flashing green to solid green.
You will now be able to cast music to your NP5 Prisma.
to disconnect from the ethernet network
Remove the Ethernet cable.
l

Connecting via wi-Fi
The network LED will flash blue when the NP5 Prisma is
ready to be set up by WiFi.
Make sure Bluetooth and Wi-Fi are enabled on your
l
mobile device.
Install the free Google Home app on your mobile
l
device.
Open the Google Home app and follow the instructions
l
for setting up the NP5 Prisma on your network in the
Chromecast Built-in Quick start Guide, or the brief
description below.
Run Google Home.
l
The Google Home app will display New device found,
NP5 Prisma.
Click set UP and follow the instructions.
l
A test sound will be played and you will be prompted to
select a name for your NP5 Prisma. If you cannot hear the
test sound you may need to increase the volume on your
amplifier.
Enter an appropriate name.
l
Once you have configured the NP5 Prisma using the
Google Home app the network LED will change from
flashing blue to solid blue.
You will now be able to cast music to your NP5 Prisma.
to disconnect from the wi-Fi network
Either:
Select wi-Fi settings for the NP5 Prisma in the Google
l
Home app.
Select Forget this network.
l
Or:
Reset the NP5 Prisma to its factory defaults; see Factory
l
reset, page 15.

5 Download the Prisma app

To view and change the NP5 Prisma settings you need the
Primare Prisma app, which is available for free download
on iOS devices from the Apple App Store and on Android
devices from the Google Play Store.
In either case search for Primare to find the app.
NP5 Prisma Network Player User Guide