Active Online D-A1 Manual page 12

2.5 Gateway
Select this item, then press "#" button to enter into the following interface:
The gateway is refer to the address of the network segment that device IP exits.
The default is 192.168.68.1.
Input gateway, then press "#" button to confirm after setting, the system will
display " Success", now the setting is successful.
2.6 Server
Select this item, then press "#" button to enter into the following interface:
Server IP is refer to the computer IP address that installed our intercom
management software, the default is 192.168.68.180. If don't need management
software, this setting will be invalid.
Input server IP , then press "#" button to confirm after setting, the system will
display " Success", now the setting is successful.
2.7 Default
Select this item, then press "#" button to enter into the following interface:
Press "1" to indicate that all settings will be back to factory default; input "0" to
indicate that give up the default setting. Then press "#" button to confirm.
Gateway
[ 192.168.68.1 ]
#OK *Cancel
Server IP
[ 192.168.12.40 ]
#OK *Cancel
Default Setting
Value- [ ]
1-OK 0-Cancel
#OK #OK *Cancel *Cancel
-10-
WWW.ACTIVEONLINE.COM.AU
+61 (0)7 5551 0306