Siemens POS8.4420/109 Manual page 9

Standards, directives and approvals
*) Documents can be downloaded at the following address:
http://siemens.com/bt/download
NOTICE
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the device off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
● Reorient or relocate the receiving antenna.
● Increase the separation between the equipment and receiver.
● Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
● Consult the dealer or an experienced radio/TV technician for help.
General data (POS8.4420/109)
Color
Weight
General data (POS8.4440/109)
Color
Weight
Siemens
Smart Infrastructure
environmental benefit, disposal).
Signal white (RAL9003)
145 g
Signal white (RAL9003)
146 g
9
A6V11519429_en--_a
2019-01-28