Menu Functions; Quick Message - XRadio DX-6000 Series User Manual

7. DX-6000 series radio operation

7.1 Menu functions

To enter the menu tree, press
can use the radio more conveniently if the user set it according to usage purpose and
environment.
☞ Note) If the menu is not operated for at least 25 seconds after launch, the radio will revert
to standby mode.
7.1.1 Contact
Select the transmission contact (set by CPS program) and press the PTT button to make a call.
If a user wants to make a call with another registered contact, select the contact in the contact
list and press the PTT button to make the call.
Contact lists in the menu can be registered / deleted using CPS (Customer Programming
Software) program.
When the user select into the contact menu, the list is displayed divided into individual, group
and All Call contacts.
 ICONs shown in contact list
- : Individual contact list (individual calls, individual messages can be sent)
- : Group contact list (group call, group message can be sent)
- : All contact lists (terminals with the same channel and color code are available)
7.1.2 Messages
When a new message arrives in the receive mode, the message contents are displayed on
the LCD and enter the menu mode. When a new message arrives at another operation, it will
be displayed as ICON.
The Message menu provides three additional menu functions: Quick Message, Inbox, and
Outbox.

1) Quick Message

button. There are 8 main menus in menu mode. The user
Figure 7-1) DX-6000 series main menus
14