XRadio DX-6000 Series User Manual page 12

5.7 P1, P2, P3 Programmable Button
The P button performs two actions as Short Key and Long Key (pressing longer than 2 seconds).
The Short Key can be used to configure the functions in the PC program.
Key Lock is automatically set when there is no input information for 10 seconds. If you want to
cancel the Key Lock function, press the P1 key with the Long Key to cancel and use all the keys.
If there is no input information for 10 seconds, Key Lock mode will be activated automatically
again. To cancel the key lock completely, turn off the Key Lock Menu in the setup menu, and
the Key Lock function is canceled.
P button Key
P1
P2
P3
5.8 UDC EAR/MIC Jack
The UDC EAR / MIC jacks are jacks for use with external speaker microphones, CPS program
setting, radio firmware upgrading, and communication with external devices.
5.9 LED Status Sign
This LED indicates the operation status of the radio. The main status notation is as follows.
① Red at normal transmission
② Green at normal reception
③ When the frequency is correct but the color code does not match, it will blink green if
not received.
④ In case of low battery, red light flashes and with an alarm sounds.
Short Key
Programmable
Programmable
Programmable
12
Long Key
Key Lock ON/OFF
Flash Light ON/OFF
Vibration mode ON/OFF