Philips MicroCube AC5659 Quick Start Manual

MicroCube DI CEE_EN
Connectivity
We partner with Air Matters, one of the leading air quality apps.
Download and install the app
Air Matters
Open the app and click 'Connect an Air Puri er or Monitor' to
connect your device. Please follow the steps in the app.
Control
Power Light Auto
dim mode
Hold for 3 seconds:
Display switch between
PM2.5 / IAI /GAS
Display
Sleep Speed 1 Speed 2
mode
Filter replace Pre- lter clean Pollution
alert mode
alert
Gas PM2.5 Allergen index
indicator indicator indicator
Allergen index from 1 to 12
where 1 indicates best air quality
Fan Child Filter
speed
lock reset
Hold for
Sleep
3 seconds
Speed 1~3
Turbo
Speed 3 Turbo
speed
Allergen Bacteria &
mode Virus mode
WiFi 3-digit display Air quality
indicator PM2.5 / IAI ring
Good Fair Poor Very poor
Maintenance
1
2 3 4
NanoProtect lter
Pre- lter x 2
2 3
Active Carbon x 2
When display shows F0
Time to clean the pre- lters
When display shows A3 When display shows C7
Time to replace NanoProtect lter Time to replace NanoProtect lter
Series 3 Active Carbon
!
press for 3 seconds to reset after cleaning or replacing accessory
The lter may produce smell after being used for a while because of the
absorption of indoor air. Remove the lter and place it where it has direct sunlight
and ventilation for several hours. Re-install and try using it again. If the odor
remains, please replace the lter.
90x127mm
1
NanoProtect lter
4
Series 3 x 2
4241 210 98434-1