Table of Contents
Advertisement
Available languages
Available languages
2
before first use
Follow these instructions when using the window cleaner for the first time: Carefully unpack the window cleaner and all accessories
and remove all packaging and any promotional stickers. Keep the packaging (plastic bags and cardboard) out of the reach of children.
After unpacking the appliance, check it for external damage that may have occurred during transport. Place the glass cleaner on a
sturdy, dry and flat surface.
3
assembly
Explanation:
1
refers to a drawing number
3
refers to a number in the drawing
The following components can be found in the packaging
1.
Microfibre cloth (2x)
2.
Holder - microfibre cloth
3.
Coupling piece
4.
Spray head
5.
Spray bottle
6.
Charger with cable
7.
Indicator light
8.
Connection for charger
9.
Squeegee attachment
10. On/off switch
11.
Basis - window cleaner
12. Collection reservoir
ASSEMBLY
2
Attach the squeegee attachment to the basis of the window cleaner and make sure you can hear it click.
3
Unscrew the spray head 2 from the spray bottle 1.
Place the holder for the microfibre cloth over the spray head 3.
Click the coupling piece 4 to the holder via the bottom side of the spray head, so that the spray head is clamped between the
holder and the coupling piece.
4
Attach the microfibre cloth 1 to the holder 2 and fasten it using the velcro.
5
Put some cleaning agent 1 in the bottle 2 and make up with water 3. Place the spray head with wiper 4 on the bottle and screw
tight 5.
CHARGING THE WINDOW CLEANER
6
Plug the charger 1 in a socket and plug the cable in the connection point 2 of the basis of the window cleaner.
Instruction: during charging, the indicator light will flash. Once the appliance is fully charged, the indicator light will burn
continuously.
Always remove the charger from the socket once the appliance is charged.
14
•
English
1
:
Advertisement
Table of Contents
