Repeat Function - DigiTech GE4107 User Manual

3.
PRESS FUNCTION BUTTON TO SELECT "USB" OR "CARD" ON DISPLAY, THEN INSERT MEMORY DEVICE
(USB DRIVE, SD OR MMC CARD).
4.
THE SYSTEM WILL START READING THE STORAGE MEDIA AUTOMATICALLY AFTER FUNCTION
SELECTION, AND DISPLAY WILL SHOW THE TOTAL NUMBER OF MP3/WMA FILES (EG. 016).
5.
THEN THE SYSTEM WILL START AUDIO PLAYBACK FROM DESRIED DEVICE (USB OR SD/MMC)
AUTOMATICALLY.
l
PLAY / PAUSE BUTTON
-
PRESS THE PLAY/PAUSE
l
STOP BUTTON
-
BUTTON TO END UP AUDIO PLAYBACK, THEN DISPLAY WILL SHOW THE TOTAL
PRESS STOP
NUMBER OF MP3/WMA FILES. AND THEN USER CAN PRESS SKIP UP"
BUTTON TO SELECT FILE FORWARD OR BACKWARD.
l
SKIP UP / SKIP DOWN
-
DURING MP3/WMA PLAYBACK, PRESS
PRESS AND HOLD SKIP UP
FORWARD.
-
DURING MP3/WMA PLAYBACK, PRESS
FILE.
PRESS AND HOLD
BACKWARD.
l
FOLDER SEARCHING
PRESS ALBUM DOWN OR ALBUM UP TO SEARCH FOLDER BACKWARD OR FORWARD.
l REPEAT FUNCTION
DURING AUDIO PLAYBACK, PRESS MODE BUTTON ONCE, SINGLE TRACK WILL BE PLAYED REPEATEDLY.
PRESS MODE BUTTON AGAIN, IT WILL REPEATEDLY PLAY ALL TRACKS IN THE WHOLE USB DRIVE, SD
OR MMC CARD.
REMARK
- IF CONNECT THE SYSTEM TO MP3 PLAYER VIA THE USB SOCKET, DUE TO VARIANCES IN MP3 ENCODING
FORMAT, SOME MP3 PLAYER MAY NOT BE ABLE TO PLAY VIA THE USB SOCKET. THIS IS NOT A
MALFUNCTION OF THE SYSTEM.
- THERE ARE NUMEROUS USB AND SD DEVICE PRODUCERS ARE. SOLUTION AND FORMAT ARE VARIABLE
BETEEN EACH OTHER. THEREFORE, WE DO NOT GARANTTEE THIS UNIT CAN SUPPORT ALL USB AND
SD DEVICE FROM EVERY BRAND.
- SD CARD CAN BE SUPPORED UP TO 8GB
TRACKS PROGRAMMING
UP TO 60 TRACKS CAN BE PROGRAMMED FOR MP3/WMA FILE AND PLAY IN ANY ORDER. BEFORE USE, BE
SURE THE SYSTEM IS AT STOP MODE BEFORE PROGRAMMING:
1.
SET AT "USB" OR "CARD" FUNCTION, THEN PRESS STOP BUTTON.
2.
PRESS MODE BUTTON, "MEM" WILL BE FLASHING ON LCD DISPLAY. MOREOVER, IT WILL INDICATE
PROGRAM NO. AND DIGITS FOR TRACK NO. TO BE PROGRAMMED.
3.
SELECT A DESIRED TRACK BY PRESSING
SELECTION IS REQUIRED, PRESSING ALBUM DOWN OR ALBUM UP TO SEARCH FOLDER BACKWARD
OR FORWARD.
4.
PRESS MODE BUTTON TO CONFIRM AND STORE THE TRACK INTO MEMORY.
5. REPEAT STEPS 3 AND 4 TO ENTER ADDITIONAL TRACKS INTO THE MEMORY IF NECESSARY.
6.
WHEN ALL THE DESIRED TRACKS HAVE BEEN PROGRAMMED, PRESS PLAY/PAUSE
PLAY THE TRACKS IN ASSIGNED ORDER.
7.
BUTTON
PRESS STOP
AGAIN TO
CANCEL PROGRAMMING.
BUTTON ONCE TO HALT PLAYING, PRESS IT AGAIN TO CONTINUE.
BUTTON
SKIP UP
BUTTON CONTINUOUSLY TO SPEED UP SELECTING
SKIP DOWN
SKIP DOWN BUTTON CONTINUOUSLY TO SPEED UP SELECTING
SKIP UP
TO STOP PLAYING OF PROGRAMMED TRACKES, PRESS STOP
BUTTON ONCE TO PLAY THE NEXT FILE.
BUTTON ONCE TO PLAY THE PREVIOUS
OR SKIP DOWN
10
OR SKIP DOWN
BUTTON.
IF FOLDER
BUTTON
TO
BUTTON