Table of Contents
Advertisement
HS-8000 User Manual
4.
GETTING STARTED
Follow these three steps before us-
ing your headset:
1. Charge your headset
2. Activate Bluetooth® on your
mobile phone (refer to the man-
ual for your mobile phone)
3. Pair your headset to your mo-
bile phone
The HS-8000 BLUETOOTH is easy
to operate. The answer/end button
on the headset performs different
functions depending on how long
you press it.
Instructions
Press time
Tap
Press briefly
Double Tap
2 quickly repeated taps
Press
Apr: 1 second
Press and hold Apr: 5 seconds
5.
CHARGING YOUR
HEADSET
Make sure that your headset is ful-
ly charged for two hours before
you start using it. Use the AC pow-
er supply to charge from a power
www.hameco-headset.com
socket. When the battery indicator
has a solid red light, your headset is
charging. When the headset is fully
charged the battery indicator turns
solid green for five minutes and is
then turned off.
Use only the charger provided in the
box – do not use chargers from any
other devices as this may damage
your headset.
Please note: The lifetime of the
battery will be significantly reduced
if your device is left uncharged for
a long period. We therefore recom-
mend that you recharge your device
at least once a month.
6.
TURNING YOUR
HEADSET ON AND OFF
• Slide the on/off button towards
the symbol "I" to turn the head-
set ON. When you do so both
indicators will flash on the HS-
8000 BLUETOOTH
• Slide the on/off button towards
the symbol "O" to turn the head-
set off.
4
Advertisement
Table of Contents
