HAMECO HS-8000 User Manual page 10

HS-8000 User Manual
I can't hear anything from my headset
• Increase the volume of the headset
• Ensure that the headset is paired to a device that is playing
• Make sure your phone is connected to the headset by tapping the an-
swer/end button
I have pairing problems
• You may have deleted your headset pairing connection in your mobile
phone. Follow the pairing instructions.
I want to reset the headset
It is possible to reset the headset. Turn the headset ON. Then "Press and
hold" the volume down and answer/end buttons at the same time for ap-
proximately 5 seconds until the battery icon and Bluetooth
5 times simultaneously – then the pairing list is reset.
• Turn the headset OFF. The next time you power on, the headset will
go into pairing mode as the first time you powered your new HS-8000
BLUETOOTH on.
Will the HS-8000 BLUETOOTH work with other Bluetooth® equipment?
• The HS-8000 BLUETOOTH is designed to work with Bluetooth
phones. It can also work with other Bluetooth
pliant with Bluetooth
hands-free profile.
I cannot use Reject call, call on hold, Redial or voice dialling
These features are dependent on the ability of your phone to support
a hands-free profile. Even if the hands-free profile is implemented, reject
call, call hold and voice dialling are optional features which are not support-
ed by all devices. Please consult your device manual for details.
Please note that some features can only be operated from the primary de-
vice e.g. voice dial using HS-8000 BLUETOOTH with 2 mobile phones.
version 1.1 or higher and support a headset and
®
www.hameco-headset.com
icon flash
®
devices that are com-
®
9
mobile
®