Advertisement
b) Press Red Arrow Up = Increase in temperature. Press
Red Arrow Down = Decrease in temperature. Hold
down the buttons to increase quickly.
c) Once you have reached your desired temperature
Press SET again and your temperature will be set.
d) The signal light above the Temperature Dial, let's you
know it is heating. It will take up to 30 mins for the hot
plate to reach your desired temperature.
e) *DISCLAIMER: the metal stirrer plate reaches a max
temperature of 299 Degrees Celsius, however the
maximum temperature that the liquid will reach is
dependent on the type of glass container being used,
the thickness of the glass and the volume of liquid.
6. When finished using the magnetic stirrer please TURN OFF
HEAT & POWER.
D)
Setting Up the Support Stand & Temperature
Probe
1. Screw the support rod into the plastic holder in the back of the
machine base.
2. Insert the "right angle clamp" onto the top of the support rod and
tighten.
3. Slide in the thermometer holder and tighten the knob.
Advertisement
