Introduction Thank you for your purchase of the EK-CL-200 Digital Magnetic Stirrer Hot Plate. The EK-CL-200 is a high-quality top end flat type magnetic stirrer, perfect for heating and stirring liquid. The digital display and adjustable temperature buttons ensure precise temperature requirements, and the adjustable speed dial makes it easy to fine tune your mixing needs.
Page 3
Stirrer Instructions 1. Plug in your magnetic stirrer & flip the POWER switch on. The signal light will turn on. 2. Place your glass (DO NOT use metal) container with liquid onto the mixing plate and drop your mixing bar into the container.
Page 4
b) Press Red Arrow Up = Increase in temperature. Press Red Arrow Down = Decrease in temperature. Hold down the buttons to increase quickly. c) Once you have reached your desired temperature Press SET again and your temperature will be set. d) The signal light above the Temperature Dial, let’s you know it is heating.
Plug in the green thermometer probe cable into the matching plastic plug on the back of the mixing machine and insert the thermometer probe into the holder. Safety Precautions 1. Please keep your magnetic stirrer grounded at all times for safety. 2.
Troubleshooting 1. Fixing an Incorrect Temperature: although rare, sometimes the digital temperature display will read a few degrees off from 100% true temperature. In this case, the following steps will help correct it. 2. Hold the SET button for 3 seconds. This will take to you the admin menu.
B. ISO14001: 2004 C. ISO13485: 2003 D. CE E. SGS Package includes: 1 x EK- CL-200 digital magnetic stirrer hot plate 1 x North American Plug 5 pieces of PTFE magnetic stir bars 1 extra fuse 1 steel support rod 23 cm 1 x 20 cm thermometer / temperature &...