1. Manuals
  2. Brands
  3. SmartThings Manuals
  4. Security System
  5. AEON LABS PANIC BUTTON
  6. Manual

SmartThings AEON LABS PANIC BUTTON Manual

Hide thumbs
1
2

Advertisement

Table of Contents

CONNECTING DEVICE:

First, install the device's battery.
Then, in the SmartThings mobile app:
1. Tap Marketplace
2. Under Things, tap Connect New Device (iOS) / Start Looking for Things (Android)
3. The app will say, I'm looking for Things... and display a spinning circle
4. While the Hub searches, press the Learn button on the device (using the provided button pin or a paper
clip)
The device's light will pulse and then stay lit for 2 seconds when it joins with the Hub
5. When the device is discovered, the message # Thing(s) Found! will increment and the device will list
below
6. Tap the device to configure it
7. Follow the in-app prompts to configure the device
8. When finished, tap Done

TO RESET THE AEON LABS PANIC BUTTON:

If the Aeon Labs Panic Button was not discovered, you may need to reset, or "exclude," the device
before it can successfully connect with the SmartThings Hub. To do this in the SmartThings mobile app:
1. Tap the menu
2. Tap the Hub
3. Tap Z-Wave Utilities
4. Tap General Device Exclusion
5.
When prompted, press the Learn button on the device (using the provided button pin or a paper clip)
After the app indicates that the device was successfully removed from SmartThings, follow the first set
of instructions above to connect the Aeon Labs Panic Button.
TO REMOVE THE AEON LABS PANIC BUTTON FROM SMARTTHINGS:
If the Aeon Labs Panic Button is connected but not performing as normal, you may need to remove the
device and reconnect it with the SmartThings Hub.
To remove the device via the SmartThings app:
1. Tap My Home
2. Tap Things
3. Select the device
4. Tap the gear icon
5. Tap Remove
6. Confirm removal
AEON LABS PANIC BUTTON:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AEON LABS PANIC BUTTON and is the answer not in the manual?

Questions and answers

Related Manuals for SmartThings AEON LABS PANIC BUTTON

Summary of Contents for SmartThings AEON LABS PANIC BUTTON

  • Page 1 Aeon Labs Panic Button. TO REMOVE THE AEON LABS PANIC BUTTON FROM SMARTTHINGS: If the Aeon Labs Panic Button is connected but not performing as normal, you may need to remove the device and reconnect it with the SmartThings Hub.
  • Page 2 When prompted, perform the exclusion procedure to remove the device from the mobile app and from the SmartThings Hub AS A QUICK REMINDER, THESE DEVICES AND SERVICES ARE ONLY TO ASSIST YOU IN MONITORING YOUR LOVED ONES AND/OR YOUR HOME AND ARE NEVER MEANT TO REPLACE MEDICAL CARE OR EMERGENCY SERVICES.

Table of Contents