Instructions Of Use; Maintenance And Cleaning; Environment Protection - Jata CE150 Instructions For Use Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 9
•  If the plate is broken, switch off the appliance to avoid risk of 
short-circuit.
•  Do not place over the plates metallic objects such knifes, forks 
and spoons. 
•  This appliance has been designed for domestic use only.
•  VERY IMPORTANT: Do not immerse the appliance in water
or any other liquid.
•  To unplug, pull from the plug, never from the cable.
•  It is absolutely normal for the appliance to make some smoke 
during the first few times it is used due to the coatings used in 
the manufacturing process of the product.
•  This appliance is not intended for using with an external timer or 
a separate system of remote control.
•  The cleaning and maintenance done by users, can not be done 
by children without any supervision, unless they are over 8 years 
and they are under supervision.
•  If the cable were to deteriorate it must be changed by an 
Authorised Service Centre.

INSTRUCTIONS OF USE

• Place the appliance on a flat and heat resistance surface.
• Plug it to the mains and place the thermostat knob (2) in its maximum position. The indicator (3) will light on
and the plate starts to heat.
• It is advisable to put the thermostat knob in the highest position (MAX), to let the plate reach, as soon as possible,
a good temperature.
• Once reached the desired temperature, turn the thermostat knob (2) anticlockwise until the indicator light (3) is
off. The thermostat will keep the selected temperature.
• Please have in mind that the plate remains hot for a time after switched it off, you can switch off the cooker
before finishing the cooking, that suppose a energy saving.
• Once the cooking is finished place the thermostat knob (2) in the "Min" position and unplug the appliance form
the mains.

MAINTENANCE AND CLEANING

• Before you proceed to cleaning, unplug the appliance from the mains and wait until the plate is totally cold.
• You can clean the body with a slightly dampened cloth.
• Wait for the plates and the surface to cool. The cleaning will be easier if it is still warm. It is enough to use a slightly
dampened cloth and if there were some difficult residues they may be cleaned with soap.
• Do not use abrasive or chemical products, metallic scourers, and such may deteriorate the surfaces.

ENVIRONMENT PROTECTION

• Dispose the appliance according to the local garbage regulations.
• Never throw it away to the rubbish. So you will help to the improvement of the environment.
10

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ce220

Table of Contents