MSW DS-200 Instructions

DS-200 UNIVERSAL DISPLAY STAND INSTRUCTIONS
Thank you for your purchase! At MSW
accessories makes a good ride great—whether on the showroom floor, your
basement shop, or in your garage, we hope this Universal Display Stand keeps
your fleet stable and organized until that next great ride.
WARNING: CYCLING CAN BE DANGEROUS. BICYCLE PRODUCTS
SHOULD BE INSTALLED AND SERVICED BY A PROFESSIONAL MECHANIC.
NEVER MODIFY YOUR BICYCLE OR ACCESSORIES. READ AND FOLLOW ALL
PRODUCT INSTRUCTIONS AND WARNINGS INCLUDING INFORMATION ON THE
MANUFACTURER'S WEBSITE. INSPECT YOUR BICYCLE BEFORE EVERY RIDE.
ALWAYS WEAR A HELMET.
For additional product and safety information go to: www.mswbike.com/safety.
COMPATIBILITY AND INTENDED USE
The MSW Universal Display Stand is adjustable and can be used with any style
of bike from road bikes to fatbikes.

TOOLS REQUIRED

#2 Philips screwdriver
INCLUDED PARTS
2 base rails
2 wheel support arms
4 Philips-head bolts
ASSEMBLY
1. Position the wheel support arms over the holes in the base rails that most
closely correspond to the width of the bike's tire (figure 1).
2. Secure the wheel support arms to the base rails with the supplied bolts
(figure 2). Torque 6–7Nm.
6400 WEST 105TH STREET // BLOOMINGTON, MN 55438 // 1-855-883-6563 // WWW.MSWBIKE.COM
14171 07/15
® we believe that having essential
Figure 1
Figure 2
3. Secure the width of the support arms with the Velcro strap (figure 3).
4. Once assembled, you may have to manually twist the rack slightly so it sits
level on your floor (figure 4).
WARNING: Make sure the wheel support arms are positioned as narrowly
as possible while still allowing you to easily move your bike into and out of the
stand. If there is too much room between the tire and support arm, your bike
could fall over causing injury, or damage to your bike or storage area.
ONGOING MAINTENANCE
Periodically check that all hardware is tight.
Figure 3
Figure 4