Beko B49L 8840 User Manual page 200

NETWORK SETUP
8 Select the line »Select Access Point« with
» « or » « and press »OK« to confirm.
V Λ
– Present WPS-supported wireless networks
are scanned to display in the »Select Ac-
cess Point« menu.
9 Select the network that you want to connect
with » « or, »
V
confirm.
– 8-digit pin code is displayed in the wire-
less WPS menu.
Note:
Refer to the manual of your router to find
7
out how the PIN is entered via a PC.
10 Use a PC to enter the pin on the router (e.g.
AVM FRITZ!Box: menu item WLAN Set-
tings... WPS) and save.
Note:
The 8-digit PIN code must be entered in the
7
modem interface in 2 minutes; otherwise,
connection of television with the modem is
cut.
11 Press » « (green) to confirm the registra-
tion.
– The message "Connection to Gateway:
Success" appears.
12 Press » « (green) to check the performed
settings and also if the local network and
internet connection has been established.
– »Testing ... Please wait« message will
be displayed, and if the connection is
established »Connection To Gateway:
Successfull«, »Internet Connection: Suc-
cessfull« messages and MAC address will
be displayed.
13 Press »EXIT« to end the setting.
86 / 115 TR
-------------------------------------------------------------------------------------------
« and press »OK« to
Λ
Connecting automatically by entering
the network password
Use this method for establishing a connection
if your router does not support "WPS-PBC" or
WPS PIN entry.
1 Open the menu with »MENU«.
2 Select menu item »Settings« with »
< >
» « or » « and press »OK« to confirm.
3 Select the menu item »Network« with »
<
» « and press » « to confirm.
V
– »Network« menu is active.
Settings > Network
Picture Sound Source
Change Connection Type
Network Configuration
Wake-on-LAN
Advanced
Connec Test Connection Change Area
4 Select the line »Change Connection Type«
with » « or » « and press »OK« to
V Λ
confirm.
5 Select the option »Wireless« with »
» « and press »OK« to confirm.
Λ
– WiFi warning message will be displayed.
6 Confirm the message »Do you want to turn
on Wi-Fi?« select »Yes« with »
press »OK« to confirm.
7 Select the line »Network Configuration«
with » « or » « and select the option
V Λ
<
»AUTO« with » « or »
8 Select the line »Select Access Point« with
» « or » « and press »OK« to confirm.
V Λ
– »Select Access Point« menu is displayed
by scanning available wireless networks.
9 Select the network that you want to con-
nect with » « or »
V
confirm.
– Wireless connection password screen is
displayed.
Television / User Manual
«, »
V Λ
>
« or
Tuesday
xx xxx xxxx
TV Network Timer Parental
Wired
AUTO
Off
Select Back
BACK
« or
V
< >
« or » « and
>
«.
« and press »OK« to
Λ
«,