Measuring Water Hardness - Philips Saeco HD8751/15 Operating Instructions Manual

ENGLISH
12
8
Press the " " button and scroll the pages by pressing the "
button until the following page is displayed.
9
Press the " " button to select "ON" and press the "
confi rm.
In this way the machine has been programmed to inform the user of
the need to replace the fi lter.
Note: When an "INTENZA+" water fi lter must be replaced with a new one, the
function must be reset. Replace the fi lter as previously shown.
After that, enter the programming menu until the indicated page is displayed
and select the "RESET" option. Then press the "
programmed to manage a new fi lter.
Note: If the fi lter is already installed and you want to remove - but not replace -
it, select the "OFF" option and then press the "
10
To exit, press the " " button until the home page is displayed.
Note: If there is no "INTENZA+" water fi lter, insert the small white fi lter previ-
ously removed into the water tank.

Measuring Water Hardness

Measuring water hardness is very important in order to correctly manage
the "INTENZA+" fi lter and the frequency with which the machine must be
descaled.
1
Immerse in water the water hardness test strip provided with the
machine for 1 second.
Note: The test strip is only valid for one measurement.
2
Check how many squares change colour and refer to the table.
Note: The letters correspond to the references that are located in the base of
the Intenza fi lter. The fi lter must be adjusted according to this measurement.
"
" button to
" button. The machine is now
" button.