Philips Saeco HD8753/89 Operating Instructions Manual page 16

ENGLISH
14
6
Dispense the water in the tank by using the hot water function (see
section "Hot Water Dispensing").
7
Fill the water tank again.
8
Press the " " button and scroll the pages by pressing the "
ton until the following page is displayed.
9
Press the " " button to select "ON" and press the "
confi rm.
In this way the machine has been programmed to inform the user of
the need to replace the fi lter.
Note: When the "INTENZA +" water fi lter needs to be replaced with a new one,
the following icon is displayed; in this case the function must be reset. Replace
the fi lter as previously shown.
After that, enter the programming menu until the indicated page is displayed
and select the "RESET" option. Then press the "
programmed to manage a new fi lter.
Note: If the fi lter is already installed and you want to remove - but not replace -
it, select the "OFF" option and then press the "
10
To exit, press the " " button until the home page is displayed.
Note: If there is no "INTENZA+" water fi lter, insert the small white fi lter previ-
ously removed into the water tank.
" but-
" button to
" button. The machine is now
" button.